Correcting Faults With Your Thermometer

April 22, 2016

Metcheck specialise in supplying MIN/MAX Thermometers for your home or garden. The fun of these instruments is to make a note of your minimum and maximum measurements on a daily basis before resetting. Use the following steps to get the most out of your thermometer.

Correcting Faults

Although each thermometer is individually checked and tested before it leaves our offices, it is possible that the spirit column may have separated in transit. This is not a problem and the following procedure should cure it:

FIRMLY grasp the thermometer at the top, holding it with your arm upwards and the thermometer upside down. Stand clear of any objects and with a sharp movement thrust your arm downwards. Repeat until the spirit or mercury joins together.

Siting Your MIN/MAX Thermometer

April 22, 2016

To get the best from your Metcheck thermometer always choose a shaded and protected position with free circulation of air, away from draughts or immediate heat.

View full article →

Resetting Your Thermometer

April 22, 2016

MIN/MAX thermometers should be reset every day after you have taken readings. They can be reset in a number of ways depending on the model. Find out more here.

View full article →